Bulkhead - Tank Connector Fittings

{Description}
Bulkhead Fittings designed to fit pipework to tanks and other watertight plumbing connections

- All Fastlight PVC-U pipe and fittings are high quality, approved by the Water Regulations Advisory Scheme and fully reef safe.
- All pipe and fittings are metric and compatible with many other makes of metric pipe with joints connected using solvent weld glue.
- Supplied complete with one rubber and one nylon washer.

- These Bulkheads are sized so the correct pipe fits 'inside' of the Bulkhead spigot into both the top and bottom of the fitting, if you require a smaller Bulkhead Fitting you can go down a size (25mm, 32mm, 40mm, 50mm & 63mm only) by using a Socket Coupler to connect your pipework to the spigot end and still provide the correct bore through the Bulkhead. i.e. 40mm Bulkhead with a 40mm Pipe fitted 'inside' of the fitting or 32mm Bulkhead and 40mm Socket Coupler with a 40mm Pipe fitted to the spigot of the fitting.
{Technical}
Pressure: 10 Bar - 145 psi.
Connection: Glue Socket x Male Thread.
Material: PVC-U.
Colour: Grey.
Dimensions:
20mm. 78mm L. (44mm Thread) x 40mm W. Minimum Hole Diameter 27mm.
25mm. 84mm L. (46mm Thread) x 48mm W. Minimum Hole Diameter 35mm.
32mm. 93mm L. (50mm Thread) x 58mm W. Minimum Hole Diameter 43mm.
40mm. 100mm L. (49mm Thread) x 72mm W. Minimum Hole Diameter 54mm.
50mm. 114mm L. (52mm Thread) x 90mm W. Minimum Hole Diameter 67mm.
63mm. 123mm L. (54mm Thread) x 95mm W. Minimum Hole Diameter 77mm.
{Availability}
In stock for next working day delivery